Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Detach the 6 claws and 3 clips, and remove the front door scuff plate.
9. REMOVE FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedures described for the LH side.
10. REMOVE REAR DOOR SCUFF PLATE LH
(a) Detach the 8 claws and 2 clips, and remove the rear door scuff plate.
11. REMOVE REAR DOOR SCUFF PLATE RH
HINT
Use the same procedures described for the LH side.
12. REMOVE COWL SIDE TRIM BOARD LH
(a) Remove the clip.
(b) Detach the 2 clips and remove the cowl side trim board.
13. REMOVE COWL SIDE TRIM BOARD RH
HINT
Use the same procedures described for the LH side.