Tundra 4WD V8-4.6L (1UR-FE) (2010)
(b) Install the outer lap belt anchor with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Attach the 2 claws to install the cover.
18. INSTALL BACK PANEL TRIM LH
(a) Attach the 8 clips to install the back panel trim.
(b) Install the package holder net hook.
19. INSTALL BACK PANEL TRIM RH
(a) Attach the 8 clips to install the back panel trim.
(b) Install the package holder net hook.
20. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH