Tundra 4WD V8-4.6L (1UR-FE) (2010)
(c) Detach the 6 clips and remove the lower quarter trim panel.
25. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
26. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
(a) Using a screwdriver, detach the claw and remove the cover.
HINT
Tape the screwdriver tip before use.
(b) Remove the 2 bolts.
(c) Detach the 4 clips.
(d) Pass the rear seat outer belt floor anchor through the quarter trim panel, and remove the front quarter trim panel.
27. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
28. REMOVE ROOF CONSOLE BOX ASSEMBLY
(a) for Short Type:
Remove the roof console box See: Console/Service and Repair/Overhead Console Box (for Short Type)/Removal.
(b) for Long Type:
Remove the roof console box See: Console/Service and Repair/Overhead Console Box (for Long Type)/Removal.