Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Insert a screwdriver into the service notch and break off the cap.
(b) Detach the clip and remove the assist grip plug.
38. REMOVE COAT HOOK
HINT
Use the same procedure to remove the coat hook on the other side.
(a) Using a screwdriver, detach the 2 claws and remove the coat hook cap.
HINT
Tape the screwdriver tip before use.
(b) Detach the clip and remove the coat hook.
39. REMOVE ROOF HEADLINING ASSEMBLY
(a) w/ EC Mirror:
(1) Disconnect the EC mirror connector.
(b) Disconnect the roof wire connector and detach the 3 clamps from the front pillar.
(c) Detach the 4 clips and remove the roof headlining.