Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Install the visor holder with the screw.
HINT
Use the same procedure to install the visor holder on the other side.
8. INSTALL VISOR ASSEMBLY LH
(a) w/o Illumination:
(1) Install the visor with the 3 screws.
(b) w/ Illumination:
(1) Connect the connector.
(2) Install the visor with the 4 screws.
9. INSTALL VISOR ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
10. INSTALL VISOR BRACKET COVER LH
(a) Attach the 4 claws to install the visor bracket cover.
11. INSTALL VISOR BRACKET COVER RH