Tundra 4WD V8-4.6L (1UR-FE) (2010)
(e) Attach the 2 claws to close the seat belt anchor cover.
(f) Attach the claw to install the cover.
13. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
14. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH
(a) Attach the 7 clips to install the lower quarter trim panel.
(b) Twist the seat belt clockwise and install the outer lap belt anchor with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)