Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2792001.png)
Power Door Lock Actuator: Testing and Inspection
Front Door Lock (for Double Cab)
DOOR LOCK: FRONT DOOR LOCK (for Double Cab): INSPECTION
1. INSPECT FRONT DOOR LOCK ASSEMBLY LH
(a) Check the door lock motor.
(1) Apply battery voltage to the door lock motor and check operation of the door lock motor.
OK:
*
If the result is not as specified, replace the door lock assembly.
(b) Check the door lock position switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
*
If the result is not as specified, replace the door lock assembly.
(c) Check the door lock and unlock switch.
(1) Measure the resistance according to the value(s) in the table below.
