Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2808002.png)
(a) Using a moulding remover, detach the 2 clips and 5 claws, and remove the armrest base panel.
(b) Disconnect the door control switch connector and power window regulator connector.
2. REMOVE DOOR CONTROL SWITCH ASSEMBLY
(a) Detach the 2 claws and remove the door control switch.
Installation
DOOR LOCK: DOOR CONTROL SWITCH (for Front RH): INSTALLATION
1. INSTALL DOOR CONTROL SWITCH ASSEMBLY
(a) Attach the 2 claws to install the control switch.
2. INSTALL FRONT ARMREST UPPER BASE PANEL RH
(a) Connect the door control switch connector and power window regulator connector.
