Tundra 4WD V8-4.6L (1UR-FE) (2010)
Seat Memory Switch: Service and Repair
Installation
SEAT: SEAT MEMORY SWITCH (w/ Seat Position Memory System): INSTALLATION
1. INSTALL SEAT MEMORY SWITCH
(a) Install the seat memory with the 2 screws.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front
Door (for Double Cab)/Reassembly
3. INSTALL FRONT DOOR ARMREST COVER LH
4. INSTALL COURTESY LIGHT ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Door (for Double
Cab)/Reassembly
5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Reassembly
6. INSTALL FRONT ARMREST UPPER BASE PANEL LH See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Door (for
Double Cab)/Reassembly
7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front
Door (for Double Cab)/Reassembly