Tundra 4WD V8-4.6L (1UR-FE) (2010)
2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
3. REMOVE RECLINING POWER SEAT SWITCH KNOB LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
4. REMOVE FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Disassembly
5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal and
Replacement/Front Seat Inner Belt Assembly/Removal
6. REMOVE INNER FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
7. REMOVE FRONT SEATBACK COVER WITH PAD LH
(a) w/ Seat Heater System or Climate Control Seat System:
Disconnect the seat heater connector and detach the wire harness clamp.
(b) Detach the hook.
(c) Remove the hog rings and seatback cover wires.
(d) Remove the nut and seatback cover bracket from the seat frame.