Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2872007.png)
(e) Install the seatback cover wires.
(f) Using hog ring pliers, install new hog rings to the seat frame.
(g) Attach the hook.
(h) w/ Seat Heater System or Climate Control Seat System:
Connect the seat heater connector and attach the wire harness clamp.
3. INSTALL INNER FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Reassembly
4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal and
Replacement/Front Seat Inner Belt Assembly/Installation
5. INSTALL FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Reassembly
6. INSTALL RECLINING POWER SEAT SWITCH KNOB LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Reassembly
7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Reassembly
