Tundra 4WD V8-4.6L (1UR-FE) (2010)
(f) Detach the 4 claws and remove the 2 headrest supports.
(g) Remove the hog rings and seatback cover with pad.
8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
9. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH
(a) w/ Seat Heater System:
Cut off the tack pins which fasten the seat heater to the seatback cover, and then remove the seatback heater from the seatback cover.
(b) w/ Climate Control Seat System:
Cut off the tack pins which fasten the seat heater to the seatback cover, and then remove the seatback heater from the seatback cover.
Installation
SEAT: FRONT SEATBACK HEATER (w/ Seat Heater System or Climate Control Seat System): INSTALLATION