Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2895004.png)
Set the seat cushion heater with the name stamp side facing the seat cushion cover.
(b) Install the seat cushion heater with new tack pins.
(c) w/ Climate Control Seat System:
Set the seat cushion heater with the name stamp side facing the seat cushion cover.
(d) Install the seat cushion heater with new tack pins.
2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Reassembly
3. INSTALL FRONT SEAT CUSHION COVER WITH PAD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Reassembly
4. INSTALL FRONT POWER SEAT SWITCH LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Reassembly
