Toyota Workshop Service and Repair Manuals > Tundra 4WD V8-4.6L (1UR-FE) (2010) > Body and Frame | Sensors and Switches - Body and Frame | Power Seat Switch | Component Information | Service and Repair | Power Seat Switch (w/o Seat Position Memory System)

Page 2

Removal

SEAT: FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat): REMOVAL

1. REMOVE FRONT SEAT ASSEMBLY LH

(a) Remove the front seat See: Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual Seat)/Removal.

2. REMOVE VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat) See: Seats/Service and Repair/Overhaul/Front Seat Assembly (for Manual

Seat)/Disassembly

3. REMOVE VERTICAL SEAT ADJUSTER KNOB LH (for 8 Way Seat) See: Seats/Service and Repair/Overhaul/Front Seat Assembly (for

Manual Seat)/Disassembly

4. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH See: Seats/Service and Repair/Overhaul/Front Seat Assembly (for Manual

Seat)/Disassembly

5. REMOVE FRONT SEAT CUSHION SHIELD LH See: Seats/Service and Repair/Overhaul/Front Seat Assembly (for Manual Seat)/Disassembly

6. REMOVE FRONT POWER SEAT LUMBAR SWITCH LH

(a) Remove the 2 screws and switch.

Installation

SEAT: FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat): INSTALLATION

Toyota Workshop Service and Repair Manuals