Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1760001.png)
Acceleration/Deceleration Sensor: Component Tests and General Diagnostics
BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR: INSPECTION
1. CHECK YAW RATE SENSOR
(a) Check the yaw rate sensor.
Under any of the following conditions, replace the sensor with a new one:
*
The surface of the sensor is cracked, dented, or chipped.
*
The connector is scratched, cracked, or damaged.
*
The sensor has been dropped.
