Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1778001.png)
Hydraulic Control Assembly - Antilock Brakes: Removal and Replacement
Components
BRAKE CONTROL: BRAKE ACTUATOR: COMPONENTS
Removal
BRAKE CONTROL: BRAKE ACTUATOR: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
2. DISCONNECT VSC ACTUATOR CONNECTOR
(a) Pull the release bar and disconnect the VSC actuator connector.
3. REMOVE BRAKE TUBE
(a) Use tags or make a note to identify the reconnection locations.
