Tundra 4WD V8-4.6L (1UR-FE) (2010)
Traction Control Switch: Service and Repair
Installation
BRAKE CONTROL: VSC OFF SWITCH: INSTALLATION
1. INSTALL VSC OFF SWITCH
(a) Attach the 2 claws to install the VSC OFF switch into the lower instrument panel finish panel LH.
(b) Connect the VSC OFF switch connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
3. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Regular Cab)/Installation
4. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (For Regular Cab)/Installation
5. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Roof Headlining (For Double Cab)/Installation