Tundra 4WD V8-4.6L (1UR-FE) (2010)
Hydraulic Control Assembly - Antilock Brakes: Overhaul
Disassembly
BRAKE CONTROL: BRAKE ACTUATOR: DISASSEMBLY
1. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY
(a) Using a T30 "TORX" wrench, remove the 3 screws and actuator bracket.
Reassembly
BRAKE CONTROL: BRAKE ACTUATOR: REASSEMBLY
1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY
(a) Using a T30 "TORX" wrench, install the actuator bracket with the 3 screws.
Torque : 9.5 Nm (97 kgf-cm, 84 in-lbf)