Tundra 4WD V8-4.6L (1UR-FE) (2010)
Parking Brake Cable: Service and Repair
Removal
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
2. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Driver Side Knee Airbag Assembly/Removal
5. RELEASE PARKING BRAKE PEDAL
6. DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY See: Parking Brake Pedal/Service and Repair/Removal and
Replacement/Removal
7. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY (for 1GR-FE)
(a) for Regular Cab Standard Deck:
Remove the front No. 3 exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Exhaust Pipe (for
Regular Cab Standard Deck)/Removal.
8. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for 1GR-FE)
(a) for Regular Cab Standard Deck:
Remove the front No. 2 exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Exhaust Pipe (for
Regular Cab Standard Deck)/Removal.
(b) except Regular Cab Standard Deck:
Remove the front No. 2 exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Exhaust Pipe
(Except Regular Cab Standard Deck)/Removal.
9. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY (for 1UR-FE)
(a) for Regular Cab Standard Deck:
Remove the front No. 3 exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Exhaust Pipe (for
Regular Cab Standard Deck)/Removal.
10. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY (for 3UR-FE)
(a) for Regular Cab Standard Deck:
Remove the front No. 3 exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Exhaust Pipe (for
Regular Cab Standard Deck)/Removal.
11. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY (for 3UR-FBE)
(a) for Regular Cab Standard Deck:
Remove the front No. 3 exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Exhaust Pipe (for
Regular Cab Standard Deck)/Removal.
12. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for 1UR-FE)