Tundra 4WD V8-4.6L (1UR-FE) (2010)
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the No. 3 parking brake cable to the intermediate lever and install the 5 bolts.
for bolt A - Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)
for bolt B - Torque : 14 Nm (138 kgf-cm, 10 ft-lbf)
NOTICE:
Do not bend and twist the parking brake cable.
4. INSTALL PARKING BRAKE SHOE LEVER LH See: Service and Repair/Reassembly
5. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH See: Service and Repair/Reassembly
6. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH See: Service and Repair/Reassembly
7. INSTALL PARKING BRAKE SHOE RETURN SPRING LH See: Service and Repair/Reassembly
8. CHECK PARKING BRAKE INSTALLATION See: Service and Repair/Reassembly
9. INSTALL REAR DISC LH See: Disc Brake System/Service and Repair/Removal and Replacement/Rear Brake/Installation
10. ADJUST PARKING BRAKE SHOE CLEARANCE See: Adjustments
11. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Service and Repair/Reassembly
12. INSTALL REAR WHEEL LH See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Removal and
Replacement/Rear Shock Absorber/Installation
13. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY