Tundra 4WD V8-4.6L (1UR-FE) (2010)
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
(b) Connect the 2 vacuum hoses to the vacuum switching valve.
6. INSTALL STUD BOLT
(a) Using an E5 "TORX" socket wrench, install the 2 stud bolts.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
7. INSTALL V-BANK COVER PIN
(a) Install the pin to the intake manifold.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
8. INSTALL V-BANK COVER BRACKET
(a) Install the bracket with the 2 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
9. INSTALL FUEL TUBE SUB-ASSEMBLY
(a) Install the fuel tube to the intake manifold with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
10. INSTALL INTAKE MANIFOLD