Tundra 4WD V8-4.6L (1UR-FE) (2010)
Camshaft Gear/Sprocket: Specifications
CAMSHAFT TIMING GEAR
LH
Using a wrench to hold the hexagonal portion of the No. 3 camshaft, tighten the camshaft timing gear with the bolt.
Torque...................................................................................................................................................................................100 Nm (1020 kgf-cm, 74 ft-lbf)
Using a wrench to hold the hexagonal portion of the No. 4 camshaft, tighten the camshaft timing exhaust gear with the bolt.
Torque...................................................................................................................................................................................100 Nm (1020 kgf-cm, 74 ft-lbf)
RH
Using a wrench to hold the hexagonal portion of the No. 1 camshaft, tighten the camshaft timing gear with the bolt.
Torque...................................................................................................................................................................................100 Nm (1020 kgf-cm, 74 ft-lbf)
Using a wrench to hold the hexagonal portion of the No. 2 camshaft, tighten the camshaft timing exhaust gear with the bolt.
Torque...................................................................................................................................................................................100 Nm (1020 kgf-cm, 74 ft-lbf)