Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-901002.png)
(a) Remove the 3 bolts and water inlet housing.
(b) Remove the gasket from the water pump.
10. REMOVE WATER PUMP PULLEY
(a) Using SST, hold the water pump pulley.
SST : 09960-10010
09962-01000
09963-01000
(b) Remove the 4 bolts and water pump pulley.
11. REMOVE WATER PUMP ASSEMBLY
(a) Remove the 8 bolts, water pump and gasket.
