Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-938004.png)
(a) Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2
No. 2 converter protector stays.
11. REMOVE NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 1)
(a) Remove the 4 bolts, 4 nuts, lower No. 1 monolithic converter protector, upper No. 1 monolithic converter protector and 4 No. 1 converter
protector stays.
12. REMOVE MONOLITHIC CONVERTER PROTECTOR (for Bank 2)
(a) Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2
No. 2 converter protector stays.
13. REMOVE NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2)
(a) Remove the 4 bolts, 4 nuts, lower No. 1 monolithic converter protector, upper No. 1 monolithic converter protector and 4 No. 1 converter
protector stays.
Installation
1UR-FE EXHAUST: EXHAUST PIPE (for Regular Cab Standard Deck): INSTALLATION
1. INSTALL MONOLITHIC CONVERTER PROTECTOR (for Bank 1)
(a) Install the 2 No. 1 converter protector stays and 2 No. 2 converter protector stays.
(b) Install the 2 monolithic converter protectors with the 4 bolts and 4 nuts.
Torque : 11 Nm (107 kgf-cm, 8 ft-lbf)
