Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2327008.png)
(4) for Driver Side:
Install the 3 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(5) for Driver Side:
Install the 3 caps.
(b) Attach the clamps and connectors to the wire harness.
(c) Install the 8 bolts, 2 screws and 4 nuts.
3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(a) for Column Shift Type:
Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation.
