Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2328004.png)
(1) Detach the claw and remove the main plate.
(2) Remove the 2 screws and damper servo.
10. REMOVE DAMPER SERVO SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 screws and damper servo.
11. REMOVE BLOWER CASE SUB-ASSEMBLY
(a) Remove the 3 screws.
(b) Detach the 2 claws and remove the case.
12. REMOVE BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 screws and damper servo.
13. REMOVE COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
