Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2328005.png)
(a) Disconnect the connector.
(b) Remove the 3 screws and damper servo.
14. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Remove the 3 screws and plate.
(b) Detach the 3 claws and remove the heater clamp.
(c) Remove the heater radiator unit.
15. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the packing.
(b) Remove the 6 screws and detach the 4 claws.
