Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2342001.png)
Compressor Clutch Relay: Testing and Inspection
AIR CONDITIONING: MAGNETIC CLUTCH RELAY: ON-VEHICLE INSPECTION
1. INSPECT MAGNETIC CLUTCH RELAY (MG CLT)
(a) Remove the magnetic clutch relay from the engine room relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
*
If the result is not as specified, replace the relay.
(c) Install the magnetic clutch relay.
