Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2999001.png)
Dimmer Switch: Testing and Inspection
METER: LIGHT CONTROL RHEOSTAT: INSPECTION
1. INSPECT LIGHT CONTROL RHEOSTAT (w/o TAIL Cancel Switch)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) If the result is not as specified, replace the rheostat.
2. INSPECT LIGHT CONTROL RHEOSTAT (w/ TAIL Cancel Switch)
(a) Measure the resistance according to the value(s) in the table below.
