Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Remove the fuel suction with pump and gauge tube See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair/Removal and Replacement/Removal.
2. REMOVE FUEL SENDER GAUGE ASSEMBLY
(a) Disconnect the fuel sender gauge connector.
(b) Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.
Installation
1UR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
(a) Set the sender gauge to the fuel sub tank. Then slide the sender gauge downward to install it.
(b) Connect the fuel sender gauge connector.
2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(a) Install the fuel suction with pump and gauge tube See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair/Removal and Replacement/Installation.