Tundra 4WD V8-4.6L (1UR-FE) (2010)
Fog/Driving Lamp Relay: Testing and Inspection
LIGHTING: FOG LIGHT RELAY: ON-VEHICLE INSPECTION
1. REMOVE FOG LIGHT RELAY (FOG)
(a) Remove the fog light relay from the engine room relay box.
2. INSPECT FOG LIGHT RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) If the result is not as specified, replace the relay.
3. INSTALL FOG LIGHT RELAY