Tundra 4WD V8-4.6L (1UR-FE) (2010)
Key Cylinder Lamp: Service and Repair
Installation
LIGHTING: IGNITION KEY CYLINDER LIGHT: INSTALLATION
1. INSTALL IGNITION KEY CYLINDER LIGHT
(a) Connect the connector.
(b) Attach the 2 claws to install the key cylinder light.
(c) Connect the unlock warning switch connector.
2. INSTALL UPPER STEERING COLUMN COVER See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
3. INSTALL LOWER STEERING COLUMN COVER See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
Some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming and Relearning