Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-3198001.png)
Headlamp Relay: Testing and Inspection
LIGHTING: HEADLIGHT RELAY: ON-VEHICLE INSPECTION
1. REMOVE HEADLIGHT RELAY (HEAD)
(a) Remove the headlight relay from the engine room relay box.
2. INSPECT HEADLIGHT RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) If the result is not as specified, replace the relay.
3. INSTALL HEADLIGHT RELAY
