Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-3249002.png)
(b) Using a screwdriver, detach the claw and remove the windshield wiper switch.
HINT
Tape the screwdriver tip before use.
NOTICE:
If the claw is pressed forcefully, it will break.
16. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch.
NOTICE:
If the claw is pressed forcefully, it will break.
