Tundra 4WD V8-4.6L (1UR-FE) (2010)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER
(a) Install the receiver with the bolt.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the receiver connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
(a) for Regular Cab:
Install the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For Regular
Cab)/Installation.
(b) for Double Cab:
Install the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For Double
Cab)/Installation.
(c) for CrewMax:
Install the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Installation.