Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2041007.png)
(a) Disconnect the connector.
(b) Using a screwdriver, detach the 5 claws and remove the console box bezel.
HINT
Tape the screwdriver tip before use.
3. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver, detach the claw and remove the power outlet socket.
HINT
Tape the screwdriver tip before use.
4. REMOVE POWER OUTLET SOCKET COVER
(a) Detach the 2 claws and remove the power outlet socket cover.
5. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (for Double Cab) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Floor Shift Type)/Removal
6. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)
(a) Using a screwdriver, detach the claw and remove the power outlet socket.
HINT
Tape the screwdriver tip before use.
