Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) for AC Power Supply:
Disconnect the clamp.
(b) Remove the 3 screws and bezel.
3. REMOVE REAR POWER OUTLET SOCKET (for Standard)
(a) Detach the claw and remove the power outlet socket.
4. REMOVE REAR POWER OUTLET SOCKET COVER (for Standard)
(a) Detach the 2 claws and remove the power outlet socket cover.
5. REMOVE REAR POWER POINT SOCKET (for AC Power Supply)
(a) Detach the 2 claws and remove the power outlet socket.