Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1166001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
1UR-FE ENGINE CONTROL SYSTEM: MANIFOLD ABSOLUTE PRESSURE SENSOR: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR
(a) Disconnect the manifold absolute pressure sensor connector.
(b) Remove the screw and manifold absolute pressure sensor.
(c) Remove the O-ring from the manifold absolute pressure sensor.
