Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1265001.png)
Variable Valve Timing Actuator Position Sensor: Service and Repair
Removal
1UR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE AIR CLEANER HOSE ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
3. REMOVE VVT SENSOR
(a) Disconnect the 4 sensor connectors.
(b) Remove the 4 bolts and 4 sensors.
