Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1304001.png)
Canister Purge Control Valve: Service and Repair
Removal
1UR-FE EMISSION CONTROL: PURGE VALVE: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. DISCONNECT PURGE LINE HOSE
(a) Disconnect the 2 purge line hoses.
3. REMOVE PURGE VSV
(a) Disconnect the connector.
(b) Remove the bolt and purge VSV.
