Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1302001.png)
Canister Purge Control Valve: Testing and Inspection
1UR-FE EMISSION CONTROL: PURGE VALVE: INSPECTION
1. INSPECT PURGE VSV
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the purge VSV.
(c) Inspect the purge VSV operation.
(1) Check that air does not flow from ports.
(2) Apply battery voltage across the terminals.
(3) Check that air flows from ports.
If the result is not as specified, replace the purge VSV.
