Tundra 4WD V8-4.6L (1UR-FE) (2010)
Positive Crankcase Ventilation Valve: Service and Repair
Installation
1UR-FE EMISSION CONTROL: PCV VALVE: INSTALLATION
1. INSTALL PCV VALVE SUB-ASSEMBLY
(a) Apply a light coat of engine oil to the O-ring.
HINT
*
When reusing the PCV valve, inspect the O-ring.
*
If the O-ring has scratches or cuts, replace the PCV valve.
(b) Install the PCV valve.
Torque : 3.5 Nm (36 kgf-cm, 31 in-lbf)
2. CONNECT PCV VALVE HOSE
3. INSTALL NO. 3 ENGINE COVER
(a) Install the No. 3 engine cover.
4. INSTALL NO. 4 ENGINE COVER
(a) Install the No. 4 engine cover.
5. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation.