Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Install the 2 delivery pipe spacers and 4 insulators to the cylinder head RH.
(b) Install the delivery pipe (with injectors) to the cylinder head RH.
(c) Install the 2 bolts.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
NOTICE:
Make sure that the part of the injector labeled B is between the parts of the delivery pipe labeled A.
(d) Connect the No. 6 wire harness connector.
4. CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
(a) Connect the No. 1 fuel pipe to the fuel delivery pipe LH See: Service Precautions.
5. CONNECT FUEL TUBE SUB-ASSEMBLY
(a) Connect the fuel tube to the delivery pipe LH See: Service Precautions.
(b) Connect the fuel tube to the delivery pipe RH See: Service Precautions.
6. CONNECT NO. 2 FUEL TUBE SUB-ASSEMBLY
(a) Connect the No. 2 fuel tube to the fuel pressure regulator See: Service Precautions.