Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2399042.png)
CAUTION:
Make sure that the wire harnesses are tight. Looseness in the wire harnesses results in the tires coming free due to the shock when the
airbag is deployed.
(f) Install SST.
(1) Connect SST connector.
SST : 09082-00700
NOTICE:
To avoid damaging SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for SST
wire harness inside the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
(2) Check that no one is within a 10 m (32.8 ft.) radius of the tire which the front seat side airbag is tied to.
(3) Press SST activation switch and deploy the airbag.
CAUTION:
When deploying the airbag, make sure that no one is near the tire.
HINT
The airbag is deployed as the LED of SST activation switch comes on.
(h) Dispose of the front seat side airbag.
CAUTION:
