Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Disconnect the 3 airbag wire harness clamps from under the seat.
(b) Remove the 4 bolts and seatback.
11. REMOVE FRONT SEATBACK BOARD See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Fold Down Seat
Type)/Disassembly
12. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly
(for Fold Down Seat Type)/Disassembly
13. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly
(for Fold Down Seat Type)/Disassembly
14. REMOVE FRONT SEATBACK COVER WITH PAD RH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Fold Down Seat Type)/Disassembly
15. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY
(a) Disconnect the clamp.
(b) Remove the 2 nuts and the front seat side airbag assembly.
CAUTION:
*
The nuts must not be reused.
*
Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY (for Fold Down Seat Type): INSTALLATION