Tundra 4WD V8-4.6L (1UR-FE) (2010)
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER
(a) w/ Cruise Control:
(1) Attach the 2 claws to install the cover.
(b) w/o Cruise Control:
(1) Attach the 2 claws to install the cover.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD
(a) With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad
with a new one:
Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
(b) Check that the horn sounds.
If the horn does not sound, inspect the horn system.
7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.