Tundra 4WD V8-4.6L (1UR-FE) (2010)
Seat)/Removal.
2. REMOVE FRONT SEAT ASSEMBLY RH
(a) for Power Seat:
Remove the front seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Removal.
(b) for Manual Seat:
Remove the front seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual
Seat)/Removal.
3. REMOVE CENTER FRONT SEAT ASSEMBLY
(a) Remove the center front seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Center
Seat)/Removal.
4. REMOVE CENTER SEATBACK PANEL See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center
Seat)/Disassembly
5. REMOVE CENTER SEAT CUSHION SHIELD LH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center
Seat)/Disassembly
6. REMOVE CENTER FRONT SEAT INNER BELT ASSEMBLY
(a) Remove the bolt and the center front seat inner belt.
Installation
SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY (for Center Seat): INSTALLATION
1. INSTALL CENTER FRONT SEAT INNER BELT ASSEMBLY
(a) Install the inner belt with the nut.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.
2. INSTALL CENTER SEAT CUSHION SHIELD LH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center
Seat)/Reassembly
3. INSTALL CENTER SEAT BACK PANEL See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center
Seat)/Reassembly