Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.
Installation
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat): INSTALLATION
1. INSTALL CENTER FRONT SEAT BELT ASSEMBLY RH
(a) Align the seat frame's claws with the seat belt retractor positioning holes.
(b) Install the seat belt with the nut and bolt.
HINT
First install the bolt, and then install the nut.
for bolt - Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
for nut - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL FRONT SEAT HEADREST SUPPORT See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center
Seat)/Reassembly
3. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Reassembly
4. INSTALL SEAT FASTENER COVER See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center
Seat)/Reassembly
5. INSTALL CENTER FRONT SEAT ARMREST COVER See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Reassembly
6. INSTALL FRONT SEAT TRAY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Center Seat)/Reassembly
7. INSTALL RECLINING REMOTE CONTROL BEZEL See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Reassembly
8. INSTALL LOWER FRONT SEAT SHOULDER BELT COVER See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly
(for Center Seat)/Reassembly
9. INSTALL UPPER REAR SEATBACK LOCK BEZEL See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Reassembly
10. INSTALL FRONT SEAT SHOULDER BELT COVER See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Reassembly
11. INSTALL FRONT SEAT HEADREST ASSEMBLY