Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Align the vehicle's claws with the seat belt retractor positioning holes.
(b) Install the seat belt with the 2 bolts.
HINT
First install bolt A, and then install bolt B.
for bolt A - Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
for bolt B - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Connect the pretensioner connector as shown in the illustration.
(d) Install the shoulder anchor to the shoulder belt anchor adjuster with the nut.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Double Cab)/Installation
3. INSTALL LOWER CENTER PILLAR GARNISH