Tundra 4WD V8-4.6L (1UR-FE) (2010)
14. INSTALL REAR SEAT CUSHION COVER WITH PAD LH See: Body and Frame/Seats/Service and Repair/Overhaul/Rear Seat Assembly (for
Crewmax LH Side)/Reassembly
15. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
(a) Connect the seat belt anchor with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
HINT
The rear No. 1 seat inner belt is fixed with the same bolt as the rear center seat outer belt's anchor. Therefore, connect it when
installing the rear No. 1 seat inner belt.
16. INSTALL REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Crewmax LH Side)/Installation
17. CONNECT REAR SEAT INNER BELT ASSEMBLY See: Rear Seat Inner Belt Assembly (for CrewMax)/Installation
Components
SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Double Cab): COMPONENTS